Installing The Fork Protector; Removing The Fork Legs - GAS GAS EC 250 2021 Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.6
12.7
54

Installing the fork protector

S04421-11

Removing the fork legs

S04422-10
S03475-10
–
Position the fork protector on the left fork leg. Mount and tighten
1
screws .
Guideline
Remaining screws,
chassis
–
Position the brake line, wiring harness, and clamp. Mount and
2
tighten screws .
–
Position the fork protector on the right fork leg. Mount and tighten
3
screws .
Guideline
Remaining screws,
chassis
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
–
Remove the headlight mask with the headlight. (
Main work
–
1
Remove screws and take off the clamp.
–
Remove the cable tie.
–
2
Remove screws and take off the brake caliper.
–
Hang the brake caliper and the brake line loosely to the side.
–
3
Loosen screws . Remove the left fork leg.
–
4
Loosen screws . Remove the right fork leg.
M6 10 Nm (7.4 lbf ft)
M6 10 Nm (7.4 lbf ft)
p. 52)
( p. 93)
p. 106)