–
3
Loosen clamps
–
Disconnect plug-in connector
–
Lift the subframe slightly and secure it.
Info
Pay attention to intake flange
–
Pull throttle valve body
flange, and hang it to the side.
S04507-10
–
Open hose clamp
–
Pull off the angle piece and collect the 2-stroke oil in a suitable con-
tainer.
S04508-10
–
Remove oil screen
–
Check the oil screen for damage.
»
If the oil screen is damaged:
–
Change the oil screen.
S04509-10
–
Insert the oil screen and mount the angle piece with a new hose
clamp.
Hose clamp plier (60029057000)
S03506-10
SERVICE WORK ON THE ENGINE 18
of the throttle valve body.
4
of the rear brake light switch.
5
.
6
towards the rear, out of the intake
7
using a screwdriver.
8
and clean it.
127