11 TUNING THE CHASSIS
11.7
11.8
46
Checking the static sag of the shock absorber
402416-10
Checking the riding sag of the shock absorber
402417-10
–
A
Measure dimension
of rear wheel unloaded. (
–
Hold the motorcycle upright with aid of an assistant.
–
Measure the distance again between the rear axle and marking SAG
on the rear fender using the sag gage.
–
Note the value as dimension
Info
The static sag is the difference between measurements
B
and
.
–
Check the static sag.
Static sag
»
If the static sag is less or more than the specified value:
–
Adjust the spring preload of the shock absorber.
(
p. 47)
–
A
Measure dimension
of rear wheel unloaded. (
–
With another person holding the motorcycle, the rider, wearing full
protective clothing, sits on the seat in a normal sitting position (feet
on footrests) and bounces up and down a few times.
The rear wheel suspension levels out.
–
Another person again measures the distance between the rear axle
and marking SAG on the rear fender using the sag gage.
–
Note the value as dimension
Info
The riding sag is the difference between measurements
C
and
.
–
Check riding sag.
Riding sag
»
If the riding sag differs from the specified measurement:
–
Adjust the riding sag.
p. 45)
B
.
37 mm (1.46 in)
p. 45)
C
.
110 mm (4.33 in)
(
p. 48)
A
A