8 PREPARING FOR USE
8.7
8.8
32
Preparing the vehicle for rides on wet and muddy circuits
M01106-01
600868-01
Preparing vehicle for high temperatures or slow riding
M01129-01
600868-01
–
Mount the air filter rain cover.
Air filter rain cover (79006921000)
Info
Observe the GASGAS Technical Accessories fitting instruc-
tions.
–
Mount the steel sprocket.
–
Clean the motorcycle. (
p. 132)
–
Straighten the bent radiator fins carefully.
–
Check the radiator cap.
Value on the radiator cap
»
If the indicated value does not correspond to the setpoint value:
Warning
Danger of scalding During motorcycle operation,
the coolant gets very hot and is under pressure.
–
Do not open the radiator, the radiator hoses or
other cooling system components if the engine
or the cooling system are at operating temper-
ature.
–
Allow the cooling system and the engine to
cool down before you open the radiator, the
radiator hoses or other components of the
cooling system.
–
In the event of scalding, rinse the area affected
immediately with lukewarm water.
–
Change the radiator cap.
–
Adjust the secondary drive to the road conditions.
Info
The transmission oil heats up quickly when the clutch is
operated frequently due to an excessively high secondary
drive.
–
Clean the chain.
Chain cleaner (
p. 151)
–
Clean the radiator fins.
1.8 bar (26 psi)