13 BRAKE SYSTEM
92
–
Check that spring plate
in the brake caliper bracket are seated correctly.
E00352-10
–
Insert the new brake linings, insert the pin, and mount the cotter
pins.
Info
Always change the brake linings in pairs.
–
Operate the foot brake lever repeatedly until the brake linings are in
contact with the brake disc and there is a pressure point.
S04472-01
–
Add brake fluid to level
Brake fluid DOT 4 / DOT 5.1 (
–
Mount screw cap
Info
Use water to immediately clean up any brake fluid that has
overflowed or spilled.
S04468-10
5
in the brake caliper and sliding plate
A
.
p. 149)
1
2
with membrane
and O-ring.
6