Table of Contents
Advertisement
15.11
Adjusting the headlight range
15.12
Changing the combination instrument battery
–
Adjust headlight range. (
Preparatory work
–
Check the headlight setting. (
–
Remove the headlight mask with the headlight. (
Main work
–
1
Turn bolt
clockwise.
The headlight range increases.
–
1
Turn bolt
counterclockwise.
The headlight range decreases.
–
Adjust the headlight range by pivoting the headlight.
Guideline
The boundary between light and dark must be exactly on the
S04493-10
lower mark for a motorcycle with rider (instructions on how to
apply the mark: Checking the headlight setting).
Info
If you have a payload, you may have to correct the headlight
range.
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
Remove screws
–
Pull the combination instrument upward out of the holder.
S04494-10
–
Using a coin, turn protection cap
and take it off.
–
Remove combination instrument battery
–
Insert the combination instrument battery with the label facing out-
ward.
Combination instrument battery (CR 2032) (
–
Check the O-ring of the protection cap for correct seating.
S04495-10
ELECTRICAL SYSTEM 15
p. 109)
p. 108)
p. 108)
1
.
2
all the way counterclockwise
3
.
p. 106)
p. 106)
p. 106)
p. 145)
109
Advertisement
Table of Contents
