GAS GAS EC 250 2021 Owner's Manual page 116

16 COOLING SYSTEM
114
–
Pour coolant in up to measurement
Guideline
10 mm (0.39 in)
Coolant
400243-10
–
Push protection cap
E00904-10
–
Unplug connector
–
Remove thermostat
escapes without bubbles.
–
Mount thermostat
Guideline
Screw, cylinder head
temperature sensor
–
Plug in connector
E00905-10
–
Position protection cap
–
Pour coolant in up to measurement
Guideline
10 mm (0.39 in)
Coolant ( p. 149)
400243-10
–
Mount radiator cap
Danger
Danger of poisoning Exhaust gases are toxic and inhaling
them may result in unconsciousness and death.
–
Always make sure there is sufficient ventilation when
running the engine.
–
Use effective exhaust extraction when starting or run-
ning the engine in an enclosed space.
S04498-10
–
Allow the engine to warm up and cool down again.
A
above the radiator fins.
1.2 l (1.3 qt.) Coolant (
2
upward over the thermostat.
3
.
4
with O-ring and wait until the coolant
4
with the O-ring and tighten.
M10x1.25 12 Nm (8.9 lbf ft)
3
.
2
.
A
above the radiator fins.
5
.
p. 149)