12 Service Work On The Chassis; Raising The Motorcycle With A Lift Stand; Removing The Motorcycle From The Lift Stand; Bleeding The Fork Legs - GAS GAS EC 250 2021 Owner's Manual

12 SERVICE WORK ON THE CHASSIS

12.1
12.2
Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
12.3
52

Raising the motorcycle with a lift stand

401942-01

Removing the motorcycle from the lift stand

401943-10

Bleeding the fork legs

S04313-12
Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
–
Raise the motorcycle at the frame underneath the engine.
Lift stand (A54029955100)
Neither wheel is in contact with the ground.
–
Secure the motorcycle against falling over.
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, press side stand
your foot and lean the motorcycle on it.
Info
When you are riding, the side stand must be folded up and
secured with the rubber strap.
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
1
Release bleeder screws
Any excess pressure escapes from the interior of the fork.
–
Tighten the bleeder screws.
Finishing work
–
Remove the motorcycle from the lift stand. (
1
to the ground with
p. 52)
.
p. 52)