Changing The Fuses Of Individual Electrical Power Consumers - GAS GAS EC 250 2021 Owner's Manual

15.5

Changing the fuses of individual electrical power consumers

Info
The fuse box containing the fuses of individual electrical power consumers is located under the seat.
Preparatory work
–
Remove the seat. (
Main work
–
Open fuse box cover
–
Remove the faulty fuse.
Guideline
(All EU models)
Fuse 1 - 10 A - EFI control unit, lambda sensor, oil pump, com-
bination instrument, electronic fuel injection, diagnostics con-
nector
Fuse 2 - 10 A - horn, brake light, radiator fan (optional), turn
S04488-10
signal (optional)
Fuse 3 ‑ 10 A ‑ high beam, low beam, position light, tail light,
license plate lamp
Fuse 4 - 5 A - fuel pump
(EC 300 US)
Fuse 1 - 10 A - EFI control unit, oil pump, combination instru-
ment, electronic fuel injection, diagnostics connector
Fuse 2 - 10 A - radiator fan (optional)
Fuse 3 - 10 A - low beam, position light, tail light
Fuse 4 - 5 A - fuel pump
Fuses res - 10 A - spare fuse
Info
A faulty fuse has a burned-out fuse wire
Warning
Fire hazard Incorrect fuses overload the electrical system.
–
Only use fuses with the required ampere value.
–
Do not bypass or repair fuses.
–
Insert the spare fuse with the correct rating.
Fuse (75011088010) (
Fuse (75011088005) (
Tip
Put a spare fuse in the fuse box so that it is available if
needed.
–
Check the function of the electrical power consumer.
–
Close the fuse box cover
Finishing work
–
Mount the seat. (
ELECTRICAL SYSTEM 15
p. 64)
1
.
A
p. 145)
p. 145)
1
.
p. 65)
.
105