Changing The Headlight Bulb - GAS GAS EC 250 2021 Owner's Manual

15.8

Changing the headlight bulb

Note
Damage to reflector Grease on the reflector reduces the light intensity.
Grease on the bulb will evaporate due to the heat and be deposited on the reflector.
–
Clean and degrease the bulbs before mounting.
–
Do not touch the bulbs with your bare hands.
–
Position the headlight mask and secure it with rubber straps
The holding lugs engage in the fender.
–
Position the brake line and wiring harness in the brake line guide.
S04489-11
Finishing work
–
Check the headlight setting. (
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
Turn protection cap
counterclockwise all the way and remove it.
–
Pull bulb socket
S04492-10
–
Pull out headlight bulb
–
Insert the new headlight bulb.
Headlight (S2 / socket BA20d) (
–
Insert the protection cap with the bulb socket into the reflector and
turn it clockwise all the way.
Info
Check the sealing lip
F03250-10
seating.
–
Insert the bulb socket of the position light into the reflector.
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
ELECTRICAL SYSTEM 15
p. 108)
1
together with the underlying bulb socket
2
of the position light out of the reflector.
3
.
p. 145)
4
of the protection cap for correct
p. 108)
2
.
p. 106)
p. 106)
107