Stop Button (Ec 300 Us); Horn Button (All Eu Models); Light Switch (All Eu Models); Light Switch (Ec 300 Us) - GAS GAS EC 250 2021 Owner's Manual

6.5

Stop button (EC 300 US)

6.6

Horn button (All EU models)

6.7

Light switch (All EU models)

6.8

Light switch (EC 300 US)

1
The stop button
Possible states
• The stop button
ignition circuit is closed and the engine can be started.
pressed – In this position, the ignition circuit is inter-
• Stop button
rupted, a running engine stops, and a non-running engine will not
start.
S04408-10
1
Horn button is fitted on the left side of the handlebar.
Possible states
• The horn button is in the basic position
The horn button is pressed – The horn is operated in this position.
•
S04407-12
1
Light switch is fitted on the left side of the handlebar.
Possible states
Low beam on – Light switch is in the central position. In
this position, the low beam and tail light are switched on.
High beam on – Light switch is turned to the left. In this
position, the high beam and the tail light are switched on.
S04407-11
1
The light switch
Possible states
Light off – Light switch is pressed in up to the stop. In this position,
•
the light is switched off.
Light on – Light switch is pulled out to the stop. In this position, the
•
low beam and tail light are switched on.
S04409-10
is fitted on the left side of the handlebar.
is in the basic position – In this position, the
is located to the left of the combination instrument.
CONTROLS 6
15