15.4
Changing main fuse
Warning
Fire hazard Incorrect fuses overload the electrical system.
–
Only use fuses with the required ampere value.
–
Do not bypass or repair fuses.
Info
The main fuse protects all electrical power consumers of the vehicle.
Guideline
The charging current, charging voltage, and charging time
must not be exceeded.
Maximum charging voltage
Maximum charging current
Maximum charging time
Recharge the 12-V battery
regularly when the motor-
cycle is not being used
Battery charger (79629974000)
This battery charger tests whether the 12-V battery retains
its voltage. It is also impossible to overcharge the 12-V bat-
tery with this battery charger. The charging time may be
longer at low temperatures.
This battery charger is only suitable for lithium iron phos-
phate batteries. Read the accompanying GASGAS Techni-
cal Accessories instructions.
–
Switch off the battery charger after charging and disconnect from
the 12-V battery.
Finishing work
–
Install the 12-V battery.
–
Mount the seat. (
Preparatory work
–
Remove the seat. (
Main work
–
Pull EFI control unit
the side.
S04485-10
ELECTRICAL SYSTEM 15
14.4 V
3.0 A
24 h
6 months
Info
1
Never remove cover
.
(
p. 100)
p. 65)
p. 64)
1
upward off the rubber lugs
2
and hang to
103