Checking The Frame; Checking The Link Fork; Checking The Throttle Cable Routing - GAS GAS MC 85 2023 Owner's Manual

11.37

Checking the frame

11.38

Checking the link fork

11.39

Checking the throttle cable routing

Warning
Danger of accidents The throttle cable can become kinked, trapped or blocked if it is not routed correctly.
If the throttle cable is kinked, trapped or blocked, the speed can no longer be controlled.
–
Make sure that the throttle cable routing and the play in throttle cable complies with the specification.
–
Check that the chain guide is firmly seated.
» If the chain guide is loose:
–
Tighten the screws on the chain guide.
Guideline
Remaining screws,
chassis
V00861-01
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Check the frame for damage, cracks, and deformation.
» If the frame shows signs of damage, cracks, or deformation:
–
Change the frame.
Guideline
Repairs on the frame are not permitted.
V00858-01
–
Check the link fork for damage, cracking, and deformation.
» If the link fork shows signs of damage, cracking, or deformation:
–
Change the link fork.
V00857-01
Preparatory work
–
Remove the seat. (
–
Turn tap handle of the fuel tap to the OFF position.
–
Remove the fuel tank.
SERVICE WORK ON THE CHASSIS 11
M6
Info
Always replace a damaged link fork. GASGAS Motor-
cycles does not permit repairing link forks.
p. 52)
( p. 56)
10 Nm (7.4 lbf ft)
p. 41)
63