12 SERVICE WORK ON THE CHASSIS
12.18
64
S04436-10
S04430-11
Removing the seat
S04437-10
H02218-10
–
Position the angle lever and linkage lever.
–
6
Mount and tighten fitting
Guideline
Nut, linkage lever on
angle lever
Info
Pay attention to flat area
–
7
Mount and tighten screw
Guideline
Screw, bottom
M10
shock absorber
Info
Raise the link fork slightly to be able to mount the screw
more easily.
–
Position the frame protector.
–
8
Mount and tighten screws
Guideline
Screw, frame protector
–
Mount the new cable ties.
Finishing work
–
Remove the motorcycle from the lift stand. (
–
1
Remove screw
on the left side.
–
Raise the rear of the seat, pull the seat back, and lift it off.
.
M14x1.5
60 Nm (44.3 lbf ft)
B
.
.
60 Nm (44.3 lbf ft)
Loctite
with the washers.
M5
3 Nm (2.2 lbf ft)
p. 52)
®
2701™