Checks And Maintenance Steps For Winter Operation - GAS GAS EC 250 2021 Owner's Manual

19.2

Checks and maintenance steps for winter operation

Info
If you use the motorcycle in winter, salt can be expected on the roads. You should therefore take precautions
against aggressive road salt.
If the vehicle has been used on salted roads, use cold water for cleaning after riding. Warm water enhances the cor-
rosive effects of salt.
–
Treat bare metal (except for brake discs and the exhaust system)
with a corrosion inhibitor.
Preserving materials for paints, metal and rubber (
–
Treat all plastic parts and powder-coated parts with a mild cleaning
and care product.
Special cleaner for glossy and matte paint finishes, metal and
plastic surfaces (
(All EU models)
–
Oil the steering lock.
Universal oil spray (
–
Clean the motorcycle. (
–
Clean the brakes.
Info
After EVERY trip on salted roads, thoroughly clean the brake
calipers and brake linings, after they have cooled down and
without removing them, with cold water and dry them care-
fully.
After riding on salted roads, thoroughly clean the vehicle
with cold water and dry it well.
401060-01
–
Treat engine, link fork, and all other bare or zinc-plated parts (except
the brake discs) with a wax-based corrosion inhibitor.
Info
Corrosion inhibitor must not come in contact with the brake
discs as this would greatly reduce the braking force.
–
Clean the chain. (
CLEANING, CARE 19
p. 152)
p. 152)
p. 132)
p. 73)
p. 151)
133