Table of Contents
Advertisement
11 SERVICE WORK ON THE CHASSIS
11.38
11.39
11.40
72
A00792-10
Checking the frame
S02306-01
Checking the link fork
S02305-01
Checking the throttle cable routing
–
Check that the chain guide is firmly seated.
»
If the chain guide is loose:
–
Tighten the screws on the chain guide.
Guideline
Screw, chain
guide on link
fork at the rear
Screw, chain
guide on link
fork at the
front
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Check the frame for damage, cracks, and deformation.
»
If the frame shows signs of damage, cracks, or deformation:
–
Change the frame.
Guideline
Repairs on the frame are not permitted.
–
Check the link fork for damage, cracks, and deformation.
»
If the link fork shows signs of damage, cracks, or deformation:
–
Change the link fork.
Info
Always replace a damaged link fork. GASGAS Motor-
cycles does not permit repairing link forks.
Preparatory work
–
Remove the seat. (
p. 56)
–
Remove the fuel tank.
(
M6x19
10 Nm (7.4 lbf ft)
Loctite
M6x45
10 Nm (7.4 lbf ft)
p. 44)
p. 63)
®
243™
Advertisement
Table of Contents
