11 SERVICE WORK ON THE CHASSIS
11.37
11.38
58
Adjusting the chain guide
Info
The size of the chain wheel varies with the number of teeth. The chain guide can be adjusted on small sprockets.
Checking the frame
–
Check that the chain guide is firmly seated.
»
If the chain guide is loose:
–
Tighten the chain guide.
Guideline
Remaining screws,
chassis
F02201-01
Finishing work
–
Install the engine sprocket cover. (
–
Remove the motorcycle from the lift stand. (
–
1
Loosen screw
–
Position the chain guide.
–
Tighten the screw.
Guideline
Remaining screws,
chassis
F02201-10
–
Check the frame for cracks and deformation.
»
If the frame exhibits cracks or deformation due to a mechanical
impact:
–
Change the frame.
S00876-01
M6
p. 53)
.
M6
10 Nm (7.4 lbf ft)
Info
Always replace a frame that has been damaged due
to a mechanical impact. Repair of the frame is not
authorized by GASGAS Motorcycles.
10 Nm (7.4 lbf ft)
p. 37)