18 SERVICE WORK ON THE ENGINE
18.4
126
Cleaning the oil screen in the oil tank
Note
Environmental hazard Hazardous substances cause environmental damage.
–
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with the appli-
cable regulations.
–
Check whether air bubbles are visible in the hose
»
If air bubbles are visible:
–
Repeat the entire procedure until air bubbles are no longer
visible.
–
Mount protection cap on the diagnostics connector.
–
Mount the EFI control unit on the rubber lugs.
S03513-10
Finishing work
–
Mount the seat. (
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove main silencer. (
–
Remove the seat. (
–
Remove the fuel tank.
–
Remove the air filter box cover. (
Main work
–
Remove screws
–
2
Loosen screws
S04505-10
p. 65)
p. 52)
p. 68)
p. 64)
(
p. 70)
p. 65)
1
.
.
6
.