Adjusting The Chain Guide; Checking The Frame - GAS GAS MC 50 2022 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.37
11.38
58

Adjusting the chain guide

Info
The size of the chain wheel varies with the number of teeth. The chain guide can be adjusted on small sprockets.

Checking the frame

–
Check that the chain guide is firmly seated.
» If the chain guide is loose:
–
Tighten the chain guide.
Guideline
Remaining screws,
chassis
F02201-01
Finishing work
–
Install the engine sprocket cover. (
–
Remove the motorcycle from the lift stand. (
–
1
Loosen screw
–
Position the chain guide.
–
Tighten the screw.
Guideline
Remaining screws,
chassis
F02201-10
–
Check the frame for damage, cracks, and deformation.
» If the frame shows signs of damage, cracks, or deformation:
–
Change the frame.
Guideline
Repairs on the frame are not permitted.
S00876-01
M6 10 Nm (7.4 lbf ft)
p. 53)
p. 37)
.
M6 10 Nm (7.4 lbf ft)