11 SERVICE WORK ON THE CHASSIS
11.38
11.39
11.40
66
Checking the frame
Checking the link fork
Checking the throttle cable routing
Warning
Danger of accidents The throttle cable may slip out of the guide if routed incorrectly.
The throttle slide will then no longer be closed and the speed can no longer be controlled.
–
Make sure that the throttle cable routing and the play in throttle cable complies with the specification.
–
Check that the chain guide is firmly seated.
»
If the chain guide is loose:
–
Tighten the screws on the chain guide.
Guideline
Remaining screws,
chassis
Remaining nuts,
chassis
102192-01
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Check the frame for damage, cracks, and deformation.
»
If the frame shows signs of damage, cracks, or deformation:
–
Change the frame.
Guideline
Repairs on the frame are not permitted.
S02306-01
–
Check the link fork for damage, cracks, and deformation.
»
If the link fork shows signs of damage, cracks, or deformation:
–
Change the link fork.
Guideline
Repairs on the link fork are not permitted.
S02305-01
Preparatory work
–
Remove the seat. (
–
Turn the knurled screw on the fuel tap all the way clockwise.
–
Remove the fuel tank.
M6
10 Nm (7.4 lbf ft)
M6
10 Nm (7.4 lbf ft)
p. 42)
p. 53)
(
p. 59)