Checking The Tire Condition; Checking Tire Pressure - GAS GAS EC 250 2021 Owner's Manual

14.5

Checking the tire condition

Info
Only mount tires approved and/or recommended by GASGAS Motorcycles.
Other tires could have a negative effect on handling characteristics.
The type, condition, and pressure of the tires all have a major impact on the handling characteristic of the motorcy-
cle.
Worn tires have a negative effect on handling characteristics, especially on wet surfaces.
14.6

Checking tire pressure

Info
Low tire pressure leads to abnormal wear and overheating of the tire.
Correct tire pressure ensures optimal riding comfort and maximum tire service life.
–
Check the front and rear tires for cuts, embedded objects, and other
damage.
» If the tires have cuts, run-in objects, or other damage:
–
Change the tires.
–
Check tread depth.
Info
Adhere to the legally required minimum tread depth.
400602-10
Minimum tread depth
» If the tread depth is less than the minimum tread depth:
–
Change the tires.
–
Check the tire age.
Info
The tire date of manufacture is usually contained in the tire
label and is indicated by the last four digits of the DOT num-
ber. The first two digits indicate the week of manufacture
and the last two digits the year of manufacture.
GASGAS Motorcycles recommends that the tires be changed
after five years at the latest, regardless of the actual wear.
H01144-01
» If the tires are more than five years old:
–
Change the tires.
–
Remove protection cap.
–
Check tire pressure when the tires are cold.
Offroad tire pressure
front
rear
» If the tire pressure does not meet specifications:
–
Correct tire pressure.
–
Mount the protection cap.
400695-01
WHEELS, TIRES 14
≥ 2 mm (≥ 0.08 in)
1.0 bar (15 psi)
1.0 bar (15 psi)
97