–
Position the upper triple clamp with the handlebar.
–
Position the clutch line and the wiring harness.
–
4
Mount screw
E00921-11
–
Position the combination instrument holder, and mount and tighten
5
screws
.
Guideline
Remaining screws,
chassis
S04423-10
–
Position the fork legs.
Bleeder screws
Info
The rebound damping is located in right fork leg REB (red
adjuster). The compression damping is located in left fork
leg COMP (white adjuster).
Grooves are milled into the side of the upper end of the fork
legs. The second milled groove (from the top) must be flush
S04313-13
with the upper edge of the upper triple clamp.
–
Tighten screws
Guideline
Screw, bottom triple
clamp
S03525-11
–
4
Tighten screw
Guideline
Screw, top steering
head
S03508-10
SERVICE WORK ON THE CHASSIS 12
, but do not tighten yet.
M6
10 Nm (7.4 lbf ft)
6
are positioned toward the front.
7
.
M8
15 Nm (11.1 lbf ft)
.
M20x1.5
12 Nm (8.9 lbf ft)
57