Checking The Frame; Checking The Link Fork; Checking The Throttle Cable Routing - GAS GAS MC 250F 2021 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.38
11.39
11.40
72
A00792-10

Checking the frame

S02306-01

Checking the link fork

S02305-01

Checking the throttle cable routing

–
Check that the chain guide is firmly seated.
» If the chain guide is loose:
–
Tighten the screws on the chain guide.
Guideline
Remaining screws,
chassis
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Check the frame for damage, cracks, and deformation.
» If the frame shows signs of damage, cracks, or deformation:
–
Change the frame.
Guideline
Repairs on the frame are not permitted.
–
Check the link fork for damage, cracks, and deformation.
» If the link fork shows signs of damage, cracks, or deformation:
–
Change the link fork.
Info
Always replace a damaged link fork. GASGAS Motor-
cycles does not permit repairing link forks.
Preparatory work
–
Remove the seat. ( p. 56)
–
Remove the fuel tank. (
M6 10 Nm (7.4 lbf ft)
p. 44)
p. 63)