17.7
Changing the ignition timing map
Info
The ignition timing map connector has no function in the homologated (restricted) condition of the motorcycle.
17.8
Checking the basic position of the shift lever
Info
When driving, the shift lever must not touch the rider's boot when in the basic position.
When the shift lever keeps touching the boot, the transmission will be subject to an excessive load.
Preparatory work
–
Remove the seat. (
–
Remove the fuel tank.
Switching the ignition timing map from Performance to Soft
–
Disconnect plug-in connector
adjustment.
Soft – better rideability
Switching the ignition timing map from Soft to Performance
–
Join plug-in connector
ment.
Performance – better performance
S04502-10
Finishing work
–
Install the fuel tank.
–
Mount the seat. (
–
Sit on the vehicle in the riding position and determine distance
between the upper edge of your boot and the shift lever.
Distance between shift lever
and upper edge of boot
»
If the distance does not meet specifications:
–
Adjust the basic position of the shift lever.
400692-10
TUNING THE ENGINE 17
p. 64)
(
p. 70)
1
of the ignition timing map
1
of the ignition timing map adjust-
(
p. 71)
p. 65)
10 ... 20 mm (0.39 ... 0.79 in)
A
(
p. 122)
121