Communication Check - ISHIDA IP-EMZ Service Manual

Chapter 3 TEST MODE

3.11 COMMUNICATION CHECK

Press the [Communication Check] button on the Test Menu screen. Then, the Communication Check
screen appears. This procedure is used to perform various communication checks.
Buttons/Display Fields
MENU
ELAN Loop Back
ELAN RAM
ELAN Cable
ILAN Loop Back
ILAN RAM
ILAN Cable
RS232C Dsub Cable
Display Status
3-26
Communication Check Screen
Returns to the Test Menu 1/2 screen.
Press the [EXECUTE] button to execute a send and receive loop test within
the board.
Press the [EXECUTE] button to execute a send and receive buffer memory
test.
Connect the IF-21FD to the cable to confirm the response.
Press the [EXECUTE] button to execute a cable test.
Press the [EXECUTE] button to execute a loop back test.
Press the [EXECUTE] button to execute an ILAN RAM test.
Connect the IF-21FD to the cable to confirm the response.
Press the [EXECUTE] button to execute a cable test.
Press the [EXECUTE] button to execute a cable test and RS-232C
input/output check.
Use the loop back connector for testing.
"Operating" is displayed during execution.
"Normal" is displayed when the execution has ended normally.
"Abnormal" is displayed when execution has ended abnormally.
Function
IP-EMZ Service Manual