3.4
MACHINE SET 1/2: BASIC COMPONENT
Press the [Machine Setting] button on the Test Menu screen. Then, the Machine Set 1/2 (Component)
screen appears.
3.4.1
MACHINE SET 1/2 (COMPONENT)
This procedure is used to determine which program is to be used with this machine.
Press one of the buttons based on the actual machine configuration. When selected, the button color
will reverse yellow
Buttons/Display field
DP Type
IP-EMZ Service Manual
Machine Set 1/2 (Component) Screen
Used when no wrapping unit is equipped.
Chapter 3 TEST MODE
Function
3-7