ISHIDA IP-EMZ Service Manual page 22

Chapter 2 SETUP MODE
Buttons/Display Fields
Barcode Setup
Item Code Set
PLU Defaults
PLU Update
Key Lock Setup
PLU Date/Time
PLU Operation
Error Setup
Print Select
MENU
PAGE
2-4
Setup Menu Screen (2/2)
Changes to the Barcode Setting screen.
Set the POS type, POS system, and POS flag (system reference data).
Changes to the Item Code Setting screen.
Assign the classification code (position/digit number) in an item code, and set
the code position and the digit number for a barcode.
Changes to the PLU Default Data Setting screen display.
Set the default master data when newly created in the PLU registration.
Changes to the PLU Update screen.
Perform the batch data changing process for the master data of existing
commodities.
Changes to the Key Lock Setup screen.
Set the key lock password, and the key lock availability for each item.
Changes to the PLU Date/Time Setting screen.
Set the pack date holding function, accrued pack date processing, and time
rounding.
Changes to PLU Operation Setting screen.
Set the number of digits for calling a PLU code, register code, wrapping
mode, unit price holding function, and shop change processing.
Changes to the Error Setup screen.
Set the processing procedure when a PLU code is not found, the price data is
"0", a PLU in which the tare weight is not registered is called, or the head
failure is detected.
Changes to the Print Select screen.
Set whether to print the barcode on the top of the tray when two labels are
issued, and the barcode is set to print on the bottom label.
It is referred when "System Reference" is set in the barcode print selection
when two labels are issued in the store master registration.
Changes to the first screen of the Setup Menu.
Turns over the screen.
Function
IP-EMZ Service Manual