Barcode Setup - ISHIDA IP-EMZ Service Manual

2.9

BARCODE SETUP

After this, it is SETUP MENU 2/2.
[9][9][9] > [PAGE]
Buttons/Display Fields
MENU
Non PLU 13
Non PLU 8
PLU 13
PLU 8
POS Code Type
IP-EMZ Service Manual
Barcode Setup Screen
Determines the settings and returns to the first screen of the Setup Menu.
This is referred when "System" is set in the flag reference of the PLU
registration and the code type is set as "Non PLU 13".
The set flag data is displayed.
Enter a numeric value (max. 2 digits) and press the [SET] button to set the
entered data as a flag data.
This is referred when "System" is set in the flag reference of the PLU
registration and the code type is set as "Non PLU 8".
The set flag data is displayed.
Enter a numeric value (max. 2 digits) and press the [SET] button to set the
entered data as a flag data.
This is referred when "System" is set in the flag reference of the PLU
registration and the code type is set as "PLU 13".
The set flag data is displayed.
Enter a numeric value (max. 2 digits) and press the [SET] button to set the
entered data as a flag data.
This is referred when "System" is set in the flag reference of the PLU
registration and the code type is set as "PLU 8".
The set flag data is displayed.
Enter a numeric value (max. 2 digits) and press the [SET] button to set the
entered data as a flag data.
Select the code type to be referred to when the code type is set as "Refer" in
the PLU master file.
Press the desired button to select among Non PLU 13, Non PLU 8, PLU 13,
and PLU 8.
Chapter 2 SETUP MODE
Function
2-15