Memory Initialization - ISHIDA IP-EMZ Service Manual

Chapter 3 TEST MODE
3.6

MEMORY INITIALIZATION

Press the [Memory Initialization] button on the Test Menu screen. Then, the Memory Initialization
screen appears.
This procedure is used to delete all data except system data, initialize system data only, and create
test data.
Note: Repeat the procedure if memory initialization ends abnormally.
Buttons/Display Fields
MENU
Master Data
CLEAR
System Data
INITIALIZATION
Test Data
SETTING
Note: Repeat the procedure if memory initialization ends abnormally.
3-10
Memory Initialization Screen
Returns to the Test Menu 1/2 screen.
Clear master data.
"Processing" is displayed during execution.
"Normal" is displayed when the execution has ended normally.
"Abnormal" is displayed when execution has ended abnormally.
Initialize system data (system master and machine master data).
"Processing" is displayed during execution.
"Normal" is displayed when the execution has ended normally.
"Abnormal" is displayed when execution has ended abnormally.
Set test data after master data has been cleared and system data has been
initialized.
"Processing" is displayed during execution.
"Normal" is displayed when the execution has ended normally.
"Abnormal" is displayed when execution has ended abnormally.
Function
IP-EMZ Service Manual