ISHIDA IP-EMZ Service Manual page 104

Buttons/Display Fields
Comment Print Position
Select
Origin Print Position
Select
Register Code Print
Select
Repack Mark Print
Select
Register Code Print
Position Select
POP Print Position
Select
IP-EMZ Service Manual
Select the comment character string print position when it is included in the
PLU name extension field.
Select one of the following 4 types:
Format: Printed in the position specified by the format.
Under: Printed under the PLU name.
Under Ingredient: Printed under the ingredient.
Over: Printed above the PLU.
Press the desired button to select the type and change the button color to
blue.
Default data: "Format"
Select the origin name character string print position when it is included in the
PLU name extension field.
Select one of the following 3 types:
Format: Printed in the position specified by the format.
Left: Printed on the left of the PLU.
Right: Printed on the right of the PLU.
Press the desired button to select the type and change the button color to
blue.
Default data: "Format"
Select the item to be printed in the register code print field.
Select either "Register" or "Store No."
Press the desired button to select the type and change the button color to
blue.
Default data: "Register"
Select the printing of "." and the Use-by date on the end of each pack.
Select either "No Print" or "Print."
Press the desired button to select the type and change the button color to
blue.
Default data: "Print"
Select register code print position when it is included in the PLU name
extension field.
Select one of the following 3 types:
Format: It is printed at the position specified by the format.
Left: It is printed on the left of the PLU name.
Right: It is printed on the right of the PLU name.
Press the desired button to select the type and change the button color to
blue.
Default data: "Format"
Select POP character string print position when it is included in the PLU name
extension field.
Select one of the following 3 types:
Format: Printed at the position specified by the format.
Left: Printed on the left of the PLU name.
Right: Printed on the right of the PLU name.
Press the desired button to select the type and change the button color to
blue.
Default data: "Format"
Chapter 4 SYSTEM MODE
Function
4-25