Commissioning Mode - ABB Robotics RobotWare 6 Applications Manual

3.3 Commissioning mode

About commissioning mode
If you already have a file with configured servo gun data (button Save Servo Gun
Types, see
allows for a shortcut through the Servo Gun Setup wizard.
Running the Servo Gun Setup wizard in commissioning mode
Application manual - Servo Gun Setup
3HAC065014-001 Revision: E
Save the configuration on page
Start the Servo Gun Setup wizard.
Load the configuration file saved from previous configuration with the Servo
Gun Setup wizard. Browse to select the file.
If you want to change the name of the servo gun, type the new name.
If you want, you can add the serial number of the servo gun. This will then
be included in the saved data.
xx1800000011
© Copyright 2021 ABB. All rights reserved.
3 Servo Gun Setup wizard
3.3 Commissioning mode
51), a special commissioning mode
Continues on next page
53