Tune speed limit
Application manual - Servo Gun Setup
3HAC065014-001 Revision: E
14 Confirm that the desired max force was reached by tapping Yes.
xx1700002079
Tip
A recommendation is to use TuneMaster to view relevant signals during the
speed tuning. If any problems occur, this can help you study the course of events
in detail. For more information, see
1 Set the robot controller in Auto or Manual full speed mode and press the
start button (
) on the FlexPendant to resume the wizard.
© Copyright 2021 ABB. All rights reserved.
3 Servo Gun Setup wizard
3.2 Running the Servo Gun Setup wizard
Speed limit tuning on page
Continues on next page
Continued
68.
41