ABB Robotics RobotWare 6 Applications Manual page 52

3 Servo Gun Setup wizard
3.2 Running the Servo Gun Setup wizard
Continued
End the Servo Gun Setup wizard
52
Tip
If the gun should be used in many configurations, it is recommended to use the
tool Mechanical Unit Manager to create variants of this configuration file. See
Application manual - Mechanical Unit Manager.
The setup of the servo gun is now finished.
Close the wizard by tapping the cross in the upper right corner.
© Copyright 2021 ABB. All rights reserved.
Application manual - Servo Gun Setup
3HAC065014-001 Revision: E