ABB Robotics RobotWare 6 Applications Manual page 20

3 Servo Gun Setup wizard
3.2 Running the Servo Gun Setup wizard
Continued
Load configuration
Continues on next page
20
Load a system parameter configuration file for a servo gun. Browse to select
the desired template file. For more information about template files, see
Application manual - Additional axes and stand alone controller.
If you want to change the name of the servo gun, type the new name.
If you want, you can add the serial number of the servo gun. This will then
be included in the saved data.
xx1700002046
© Copyright 2021 ABB. All rights reserved.
Application manual - Servo Gun Setup
3HAC065014-001 Revision: E