Verifying The Shipment; Rack - IBM TS2900 Setup, Operator, And Service Manual

Chapter 3. Installation and Configuration
"Verifying the Shipment" on page 3-1
"Choosing a Location" on page 3-2
Installing Your Library
"Removing the Accessor Locking Screw" on page 3-12
"Attaching the Library to a Server" on page 3-13
"Configuring Your Library using
the Web User Interface" on
page 3-16
"Configuring Your Library using
the Operator Panel" on page 3-28
"Populating the Library with Cartridges" on page 3-31
"Verifying Library and Drive Operation" on page 3-32
"Taking the Library Online" on page 3-33
"Registering for My Notification" on page 3-33
To install and configure a desktop or rack-mounted TS2900 Tape Autoloader, perform
the procedures in this chapter in the order they are presented.

Verifying the Shipment

Verify that the following items are included in the library shipment:
• Power cord
• IBM Translated Safety Notices
• Safety notices pointer sheet (pointing to the CD-ROM)
• Quick Reference
• Setup, Operator, and Service guide CD-ROM
• Warranty information
• Device driver pointer sheet (pointing to the Internet)
• Quality Hotline card
• Rack mount kit or Deskside kit
• SAS wrap tool
• Optional transparent LTO encryption information
© Copyright IBM Corp. 2008
"Installing the Deskside Cover" on page 3-2
"Installing in a Rack" on page 3-5
4
"Logging in to the Web User Interface" on page 3-17
"Checking Firmware Level" on page 3-18
"Configuring Library Settings" on page 3-18
"Configuring Network Settings" on page 3-20
"Configuring Date and Time Settings" on page 3-21
"Configuring Encryption Settings" on page 3-22
"Configuring E-mail Notifications" on page 3-24
"Configuring Trap Notifications" on page 3-25
"Managing User Access" on page 3-27
"Saving the Library Configuration" on page 3-28
"Logging in to the Operator Panel" on page 3-28
"Configuring Network Settings" on page 3-29
"Configuring Library Settings" on page 3-30
3-1