Unpacking The Library; Verifying The Shipment - IBM TS3100 Setup, Operator, And Service Manual

Unpacking the library

About this task
Note: If the temperature in the room where the library is installed varies by 15° C (30° F) from the room
where the library was stored, allow the library to acclimate to the surrounding environment for at least
12 hours before it is unpacked from the shipping container.
Procedure
1. Before you begin, clear a work surface to unpack the library.
2. Before the library is removed from the shipping container, inspect the container for shipping damage.
If you notice any damage, report it to the shipping company immediately.
3. Open the shipping container and carefully remove the shipping materials from the top of the library.
Remove the accessory package and set it aside.
Important: When the drive is unpacked, save and store the packaging materials for future moves or
shipping.
4. Lift the library out of the carton and remove the bag from the library. Remove the foam cushion from
the back of the library. Save the packaging materials for future use.
Important: Do not place the library on the front panel or the rear panel as this action might damage
the library.

Verifying the shipment

Verify that the following items are included in your library shipment:
v With every library:
– Power cord
– Foot pads (for desktop installation)
– Documentation CD:
- Setup, Operator, and Service Guide
- Translated Safety Notices
- Statement of Limited Warranty (in 29 languages)
– IBM License Agreement for Machine Code
– Installation Quick Reference
– Warranty information (in 9 languages)
– Quality Hotline card
v With every library that contains a SCSI drive:
– SCSI terminator (one per SCSI drive)
– SCSI library-to-host cable (if ordered by customer)
– SCSI Wrap tool (one for each library)
v With every library that contains a Fibre Channel drive:
– Fibre wrap tool (one per library)
– Fibre Channel library-to-host/switch cable (if ordered by customer)
v With every library that contains a SAS drive:
– SAS library-to-host cable (if ordered by customer)
– SAS Wrap tool (one for each library)
v Optional item that is included in your shipment, if ordered:
– Rack Mount Kit
Installation and configuration
41