Installing In A Rack; Attaching The Cover To The Library Chassis (Rear Screws); Rack Mount Assembly Kit - IBM TS2900 Setup, Operator, And Service Manual

5. Attach the deskside cover using the 2 large binding-head screws
Figure 3-4. Attaching the cover to the library chassis (rear screws)
6. Place the library in the desired desktop location.
Important: Do not place the library on its side. Do not stack objects on top of the

Installing in a Rack

The TS2900 Tape Autoloader can be easily installed into a standard 19-inch rack
system. A standard 19-inch rack system contains multiple mounting locations called
EIA units as defined by the Electronics Industries Association. Each EIA unit contains
three square or round holes used to mount rack designed equipment. The library
requires 1 EIA unit (1U) of rack space. Each unit is separated by a small space.
Table 3-3 lists the parts in the rack mount assembly kit. A Phillips head screwdriver
(preferably with a magnetic head) will be needed to assemble the rack mount kit.
Table 3-3. Rack mount assembly kit
Number Part Number
45E3741
1
45E3742
2
the library (Figure 3-4).
library.
Quantity Description
1 Left rear bracket
1 Right rear bracket
4
4
Part
Chapter 3. Installation and Configuration
on the rear of
3-5