Attaching The Feet; Attaching The Cover To The Library Chassis (Side Screws) - IBM TS2900 Setup, Operator, And Service Manual

3. Turn the library over and attach the feet
Figure 3-2. Attaching the feet
4. Position the deskside cover
Figure 3-3. Attaching the cover to the library chassis (side screws)
3-4
TS2900 Tape Autoloader Setup, Operator, and Service Guide
bottom of the library (Figure 3-2). Return the library to the upright position.
1
and attach the cover to the library using 3 flat-head screws
(Figure 3-3).
6
to the designated locations on the
1
1
in the correct orientation over the library chassis
2
2
6
on each side
6