Figure A-16. Rewinding tape into cartridge
6. Continue spooling into the cartridge until the tape is taut and remains within the
7. Reassemble the drive, reversing the steps in "Beginning Procedure" on
8. Reassemble the library chassis. See "Ending Procedure" on page A-21.
A-14
TS2900 Tape Autoloader Setup, Operator, and Service Guide
1
Loader motor worm gear
1
Outer guide rail
2
flanges of the tape guiding rollers. Turn the supply reel (
additional turns. Ensure that you do not stretch the tape.
page A-12.
2
3
4
Takeup reel motor
3
Supply reel motor
4
in Figure A-16) 10
4