Chapter 4. Operations; Configuration Settings; Current Information; Hardware Attributes - IBM TS2900 Setup, Operator, And Service Manual

Monitoring the Library

Viewing Configuration Settings

Figure 4-2. Configuration settings
Use Configuration → View Settings to display a list of the library configuration
settings.
The settings displayed comprises the following:
• Library settings
• Network settings
• Drive settings

Viewing Current Information

Figure 4-3. Current information
Use View Current Information to display the network settings information.
The settings displayed comprises the following:
• Network settings

Viewing Firmware Revision

Figure 4-4. Hardware attributes
Use Service → View Firmware Revision to display the current version of the library
firmware.
Configuration
View Settings
– I/O Station
– Auto cleaning
– Number of cleaning slots
– Operator Panel back light setting
– Link speed
– IP address protocol
– IPv4 settings (IP address, subnet mask address, gateway address, DHCP)
– IPv6 settings (IP address, gateway address, prefix length, DHCP)
– Model number
View Current Information
– Worldwide node name
– IP address protocol stack
– IP address
Service
View Firmware Revision
4-3

Chapter 4. Operations