9. Remove the large pan-head screws
Figure 8-13. Removing screws from the rear of the library
10. Remove the flat-head screws
Figure 8-14. Removing the cover from the library chassis
11. Turn the library over and remove the feet
Figure 8-15. Removing the feet
8-8
TS2900 Tape Autoloader Setup, Operator, and Service Guide
library, and remove the deskside cover
6
(Figure 8-15). Return the library to the upright position.
1
on the rear of the library (Figure 8-13).
4
on each side securing the deskside cover to the
6
(Figure 8-14).
2
2
6
from the bottom of the library
1
1
4