Removing Screws From The Rear Of The; Removing The Deskside Cover; Removing Side Rails From The Library - IBM TS2900 Setup, Operator, And Service Manual

Figure A-4. Removing screws from the rear of the library
Figure A-5. Removing the deskside cover
6
Figure A-6. Removing side rails from the library chassis
A-6
TS2900 Tape Autoloader Setup, Operator, and Service Guide
b. Remove the flat-head screws
the library, and remove the deskside cover
6
c. Remove the flat-head screws
rails from the chassis (Figure A-6).
3
• For a rack mounted library, remove the library from the rack.
a. Remove the two round-head screws
rear of the library to the rack (Figure A-7).
on each side securing the deskside cover to
6
2
2
6
on each side to remove the left
6
5
on each rear bracket securing the
10
4
(Figure A-5).
and right
5
3
6