Logging In; Screen Elements; Screen Elements; Library Ready Screen - IBM TS2900 Setup, Operator, And Service Manual

3. Press the Enter key at the last digit to apply the complete entry, or press the

Logging in

At power ON or software reset, the library ready screen appears when POST
initialization completes successfully.
Figure 2-2. Library ready screen
To log in to the Operator Panel, press the Enter key. The password entry screen
appears.
Figure 2-3. Password entry screen
Press the UP and DOWN arrow keys to change the current digit. Press the Enter key
to advance to the next digit. The default password is 0000. Once you have logged in,
you can change the password using the Change Login Password command. See
"Configuring Operator Panel Settings" on page 4-11.

Screen Elements

Figure 2-4. Screen elements
The Operator Panel display a single menu item (
existence of other menu items above and below the currently displayed item is
indicated by the arrows (
In the Configuration menu, the current configuration setting is indicated by an
asterisk (
the I/O Station is currently enabled. When changing a configuration setting, the
confirmation screen in Figure 2-5 appears. Press the Enter key to confirm, or Cancel to
return to the previous screen.
2-4
TS2900 Tape Autoloader Setup, Operator, and Service Guide
b. Press the Enter key to highlight the next editable digit.
Cancel key to cancel the whole edit process and maintain the original value.
1
in Figure 2-4) on the right side of the screen.
2
in Figure 2-4) on the right side of the screen. For example, in Figure 2-4,
3
2
3
in Figure 2-4) on each screen. The
1