Installing The Library On A Desktop; Removing The Front Brackets From The Library Chassis; Removing Screws At The Front Of The Library - IBM TS2900 Setup, Operator, And Service Manual

11. Remove the large black screws
Figure 8-5. Removing screws at the front of the library
12. Remove the flat-head screws
8
Figure 8-6. Removing the front brackets from the library chassis

Installing the Library on a Desktop

For details on the deskside kit components, see "Installing the Deskside Cover" on
page 3-2.
1. Attach the left
8-4
TS2900 Tape Autoloader Setup, Operator, and Service Guide
the library to the rack, and slide the library chassis out of the rack (Figure 8-5).
11
from the front of the library chassis (Figure 8-6).
3
and right
5
each side (Figure 8-7).
from each front bracket securing the front of
11
to remove the left
8 3
4
8
rails to the chassis using 3 flat-head screws
3
and right front brackets
4
on
6