Figure 1-4. Cartridge magazine (top view)
Rear Panel
Figure 1-5. Rear panel components
Table 1-3. Rear panel component descriptions
Number
Component
Power connector
1
Power switch
2
SAS host interface connector
3
Ethernet port
4
1-4
TS2900 Tape Autoloader Setup, Operator, and Service Guide
1
5
4
The library connects to a 110/220 volt ac power supply.
The library is powered ON when the power supply switch on the rear
panel is ON (|); the library has no independent power switch on the
front panel.
Serial-attached SCSI host interface cable connection. The Ultrium 3 and
Ultrium 4 SAS drives use the SFF-8088 connection at the drive end and
SFF-8088 or SFF-8470 at the host adapter end.
This port is used to connect the library to a network.
2
3
1
2
6
Description