Geometry Of Infrastructure; Required Space For The Power Cabinet - ABB HVC Installation Manual

HVC 450 kW E-Bus Charger Installation Guide

3.5. Geometry of infrastructure

3.5.1. Required space for the Power Cabinet

A single HVC 150 (or HVC 150S) Power Cabinet requires a minimum space of 46.06 x 81.50
Inch (W x D) or 53.94 x 77.56 Inch (W x D). This space is calculated as follows:

A cabinet footprint of 46.06 x 30.32 Inch.

The following free space around the cabinet:

3.94 Inch at the rear side or 0 Inch at the rear side when both left and right side
have a minimum free space of 3.94 Inch.

3.94 Inch or 0 Inch at the left side, if another Power Cabinet is placed next to
it.

3.94 Inch or 0 Inch at the right side, if another Power Cabinet is placed next to
it.

47.24 Inch at the front side in order to open the front door. If the cabinet is
placed inside a room, consider extra free space in front of the open door
(escape way for service people).
The cabinet needs at least the opening area of the front and rear side
with a minimum free distance of 3.94 Inch. This means that cabinets
can stand in a row with one or both side entries blocked (distance on
left/right side is 0 Inch).
It is also possible that the cabinet can stand back to back (distance on
the rear side is 0 Inch). In this case both side entries must have a
minimum free distance of 3.94 Inch. If this is not the case, then the air
supply is not sufficient.
Revision: 1.2
Date released: 16-08-2018
CAUTION
COMPANY CONFIDENTIAL
Page 27 of 128