Cabling; About Cabling - ABB HVC Installation Manual

HVC 450 kW E-Bus Charger Installation Guide
To already fixed the sidewalk around the pole, there can be placed border
collar around the top of the foundation to have free access of the bolts.

4.4. Cabling

4.4.1. About cabling

There are various cabling solutions, depending on the installation situation and the cable types
used.

When the cables are routed below ground, use cables that are suitable for
underground installation.

The identity and/or function must be marked on every 78.74 Inch of the cables and on
both ends.
ABB recommends the use of crimped lugs for cable connections to Power
Cabinet and Charge Post. Mechanical lugs can be used at the discretion
of the installer and will be separately provided.
ABB is not responsible for damage caused to the Charger system due to
the use of mechanical lugs, and is not covered by the warranty.
Revision: 1.2
Date released: 16-08-2018
NOTICE
NOTICE
CAUTION
COMPANY CONFIDENTIAL
Page 46 of 128