Standard Hvc 450 Kw E-Bus Charger Without Pole - ABB HVC Installation Manual

HVC 450 kW E-Bus Charger Installation Guide

1x Horizontal frame, with mounted:
 1x Pantograph (ACS)
 1x WiFi communication unit (for the bus)
 Premounted cable set for inside the pole

Masks Plate work and door

Pole mounting material

2.1.2. Standard HVC 450 kW E-Bus Charger without pole

The possibility to design your own pole locally or the site already has a construction like a roof
where the pantograph can be mounted on. In this case the system configuration provides the
following parts:

1x HVC 150 Power Cabinet

2x HVC 150S Power Cabinet

1x Charge control set, including:

1x ACS Control Module (ACM)

1x Junction Box

1x Pantograph (ACS)

1x WiFi communication unit (for the bus)

1x Charge state indicator light
The cables between the ACS Control Module and pantograph is not part
of the order. However, the length of the cable will depend on site survey
(for pole) conducted by ABB. ABB has a standard cable list (see section
Communication glass fiber cable on Page 21) to be used for these
cables, if the site has special conditions apart from being exposed to sun;
evaluation of the cables has to be done and this will be treated as a
separate work order.
Revision: 1.2
Date released: 16-08-2018
NOTICE
COMPANY CONFIDENTIAL
Page 15 of 128