Communication Glass Fiber Cable; Electrical Components - ABB HVC Installation Manual

HVC 450 kW E-Bus Charger Installation Guide

2.2.3. Communication glass fiber cable

The CAN and Ethernet communication between the Power Cabinet and Charge control set
is done via a glass fiber cable. This glass fiber cable must be prefabricated and can be
ordered separately.
Cable length must be defined by the contractor performing installation during site survey.
Amount Part number
1 OM3, prefabricated

2.2.4. Electrical components

Emergency unit
Integrated in the pole, but need to be ordered separately if ordered without pole.
Amount Part number
1 1SFA619550R1051
1 1SFA619811R1000
Distance sensor
Integrated in the pole, but need to be ordered separately if ordered without pole.
Amount Part number
1 UT1B/E9-0AUL
RFID unit
Needed when multiple Charge control sets are installed close to each other.
Revision: 1.2
Date released: 16-08-2018
Description
OM3, PCF or fiberglass (multimode, 850 nm) optic cable with
8 fibers (4 for spare), with B-FCO(ST
Description
CE4T-10R-02 Emergency stop button
CEP1-0 Enclosure
Description
Ultrasonic Sensor (Welotec)
®
) connectors
COMPANY CONFIDENTIAL
Page 21 of 128