Sensor (Input) Static Jam Service Check - Lexmark X651de Service Manual

7462
Step
7
Check the sensor (input) for proper operation.
1. Enter the diagnostic mode
2. Select Base sensor test
3. Observe the line item "input"
Does the display on the operator panel, change every time
the sensing area of the above sensor is interrupted or
blocked.
8 Check the above sensor for proper connection.
Is the above sensor connected properly?
9
Perform a print test.
Does the problem remain?

Sensor (input) static jam service check

Use this procedure for the following jams:
• 200.13
Step
1 Check the media path for partially fed or jammed media.
Is the media path free from partially fed or jammed media?
2
Check the sensor (input) for proper operation.
1. Enter the diagnostic mode
2. Select Base sensor test
3. Observe the line item "input"
Does the display on the operator panel, change every time
the sensing area of the above sensor is interrupted or
blocked.
3 Check the above sensor for proper connection.
Is the above sensor connected properly?
4
Perform a print test.
Does the problem remain?
2-142
Service Manual
Check
Check
Yes
Go to step 9. Go to step 8.
Replace the Replace the
Sensor (input). connection.
Go to "Sensor
(input) removal
(X651, X652,
X654, X656, and
X658)" on
page 4-43.
Contact next Problem solved.
highest level of
tech support.
Yes
Go to step 2. Remove any pre-
staged or jammed
media.
Go to step 4. Go to step 3.
Replace the Replace the
Sensor (input). connection.
Go to "Sensor
(input) removal
(X651, X652,
X654, X656, and
X658)" on
page 4-43.
Contact next Problem solved.
highest level of
tech support.
No
No